Mold Treatment

Waterproof Epoxy Painting is the most effective mold inhibiting water barrier ever formulated. No other concrete sealant / antimicrobial coating has come close to its ability to inhibit the dreaded "3 M's"; mold, mildew and moisture.

Concrete and cement blocks are porous and can not stand up to the elements for very long without protection. The corrosive action of moisture passing through masonry literally eats away at these surfaces, especially those located underground.

Waterproof epoxy has a patented EPA registerded ingredient proven to effectively protect against mold and mildew growth, as well as, dampness.

Protect Against Mold Growth

Leaky crack repair

High pressure pump for crack injection

Injection packers for leaky cracks.

Leaky Cracks

• No messy digging
• Non-Intrusive process
• Repair cracks in walls & floors
• Lifetime transferable warranty

What is Polyurethane Crack Injection? Mike's Polyurethane Injection System seals large or small cracks to prevent water from coming through. A specially engineered polyurethane is injected into the crack. It reacts with water causing the urethane to expand up to 700 percent to prevent further leaking. In addition, the polyurethane remains pliable enough to allow for normal expansion and contraction. Once the polyurethane injection is completed, a cement patch compound is applied over the repair to complete the project.

Drain tile repair

Clogged interior drain tile.

Mold caused by poor drainage

Interior Drain Tile

Installing Your System

The system we install will function as designed for the lifetime of the structure.

1. Work begins by removing approximately 18" of the concrete floor along the base of the problem wall areas. An access trench is then excavated down to reach the base of the foundation footings.
2. Rigid, heavy wall PVC drain tubing is placed in the trench, surrounded by a 3/4" layer of washed rock. The rock layer assists in fine sediment filtration and more complete water drainage.
3. Holes are drilled in the wall block voids to help facilitate evacuation. Edging is installed to direct the problem water leakage into the prepared drainage trench.
4. The drain tile channels water to a heavy walled PVC basin containing the submersible sump pump. A discharge line removes the water from the sump pump.
5. Vinyl sheeting is placed over the drainage rock trench to form a final moisture barrier.
6. Concrete floor is replaced over new drainage area.

Radon

The basement waterproofing industry is continuing to recognize that poor indoor air quality is a problem that can be remedied by our industry. Considering that indoor moisture and water buildup leads to added problems within the home, basement waterproofing contractors should implement practices that will better serve their clients.

Indoor air quality control is becoming more crucial as people become aware of the health risks caused by poor indoor air quality. Over 50 percent of the air circulating through the living space comes from either the basement and/or crawl space. Continued exposure to poor indoor air as a result of toxic mold spores, radon gas infiltration, moisture and other soil gases has the potential to affect the health of those occupying the home, particularly by triggering allergies and asthma.

Improve Indoor Air Quality Control with Pene-Seal-Crete

Fortunately, controlling indoor air quality is within the contractor’s reach with the use Pene-Seal-Crete, by Emecole. Pene-Seal-Crete is a deep-penetrating sodium silicate concrete sealer that retards humidity and radon gas from passing through porous concrete.

Pene-Seal-Crete can be applied on either poured foundations or concrete block. Upon application, Pene-Seal-Crete reacts with the concrete’s free lime by forming an expanded crystalline structure beneath the surface. This process fills up pores, voids or cracks within the concrete - that may or may not be visible to the human eye – eliminating capillary action to prevent the penetration of moisture and radon gas infiltration. In addition, Pene-Seal-Crete can be used to permanently densify, strengthen, dustproof and waterproof new and existing concrete.

Application of Pene-Seal-Crete

Available in quantities from one gallon jugs to 55 gallon drums, Pene-Seal-Crete should be diluted in a 1:3 ratio with warm water and applied immediately – the product should not be thinned with solvents. Prior to use, all surfaces should be cleaned to ensure that all dirt, dust, grease, oil or other foreign particles are removed. Pene-Seal-Crete should be applied on a pre-dampened surface, in moderate weather conditions, with a temperature of at least 40 degrees Fahrenheit or higher, while avoiding direct sunlight, heavy winds or rain. To maximize its use, Emecole recommends two applications of Pene-Seal-Crete.

The use of Pene-Seal-Crete is a necessary application towards the improved control of indoor air quality. As the basement waterproofing industry continues to adapt, contractors can easily stay ahead by offering indoor air quality services to their existing basement waterproofing business.